DMG
HONIGUM PUTTY & LIGHT BODY
Honigum-Putty
offers extraordinary recovery after deformation thus facilitating a precise
reproduction of the oral situation. A precise detail reproduction is
guaranteed.
Thanks
to the DMG-developed Snap-Set technology the new Honigum-Putty offers a so far
unrivaled combination of comfortable working time and short time in mouth. Its
generous working time reduces the »mix stress« to a minimum. Deformations due
to already set material are prevented, and micro movements are reduced by the
quicker cross linking. For the patient the shorter time in mouth translates
into significantly more comfort during the treatment.
Honigum-Putty
is an impression material based on addition curing silicones. The material is
available as a hand-mix version and in the ready-to-use pre-filled MixStar
cartridge, which is suitable for use in the DMG MixStar-eMotion and other
commercially available mixing machines.
Honigum MixStar
Putty is a dynamically mixed true putty. It is the first VPS
impression material with a putty consistency available in a MixStar cartridge.
Honigum Quad FastHeavy Body Material/Heavy mix star is a
fast-setting, teal tray material perfect for fast double-phase quadrant and
single-unit impressions. Honigum is a hydrophilic poly vinylsiloxane impression
material with a patented microcrystalline wax matrix that lowers its viscosity
under bite pressure to flow into the most difficult to reach subgingival areas.
It also provides a slump free starting thickness for easy tray dispensing. The
quick snap set prevents distortion, yet it is easy to remove. Honigum's
pleasant honey aroma and neutral taste make the material extremely
patient-friendly.
INDICATIONS FOR HEAVY
MIXSTAR PUTTY:
· Indications
·
Crown and bridge impressions
·
Inlay and onlay impressions
·
All types of pickup impressions, e.g. for implants and
telescopes
Composition
·
Vinyl polysiloxanes
·
Hydrogen polysiloxanes
·
Silicium dioxide
·
Pigments
·
Additives
·
Platinum catalyst
Recommended use
Double-mix impressions
1. Fill
the tray with Honigum-Putty.
2.
Syringe the preparation with Honigum-Light. Observe the associated instructions
for use! Note: The filling of the tray and syringing should be completed at the
same time as the higher temperature in the mouth leads to a quicker setting of
the syringed material compared to the tray material. 3. Position the filled
tray in the mouth within the working time, slowly and using very little force,
and allow the impression to form. 4. Remove the impression from the mouth once
the setting time has elapsed,
INDICATIONS:
·
Crown and bridge impressions
·
Inlay and onlay impressions
Feature
Unique Snap-Set technology (long working time and short time in
mouth)
Excellent recovery after deformation
Excellent dimensional stability
Prevents mixing stress
No premature setting of the material
Short time in mouth
High patient comfort
Reduced micro movements
Excellent recovery after deformation
Highest precision
Key specification
Interactions
Rinse off residues of retraction solutions thoroughly with water
because they can increase the setting time in some instances
· Never allow the impression to come into contact with organic
solvents or liquids containing solvents as this may result in a swelling of the
material and may therefore lead to inaccuracies in the cast
· Never allow the impression material to come into contact with
latex gloves. DMG recommends the use of PVC or PE based gloves.
· Do not mix Honigum-Putty with condensation curing silicone or
polyether impression materials.
For purchase visit DMG HONIGUM PUTTY & LIGHT BODY
dental cleaning
dental doctor
dental diseases
dental doctor near me
dental dam buy
dental degree
dental decay
dental destination
dental day
dental department
dental dog treats
dental decks
dental deals
dental drill
dental diploma courses
dental diploma courses in delhi
dental denture
dental diagnosis
dental decks pdf
dental drugs
Related Posts :
Subscribe by Email
Follow Updates Articles from This Blog via Email
No Comments