Saturday, September 28, 2019

thumbnail

Gc Tempron

Gc Tempron

Description
Manufacturing of temporary restorations on a model or in the mouth.
INDICATION
  • For the preparation of temporary crowns, bridges or dentures. Space maintenance.
Features
  • Rapid cross linking
  • Smooth surfaces without porosities
  • Suitable for making repairs
  • Comfortable working time
Packaging
  • 1 x 100g Powder
  • 1 x 104ml Liquid
  • 1 x Powder Measure
  • 1 x Liquid Measure No.4
  • 1 x Mixing Cup
Direction to Use
A. CROWNS
  1. 1. PREPARATION
  1. a) Fill defects in the tooth with GC CAVITON or equivalent temporary filling material.
  2. b) Take an impression using a heavy (i.e. less water) alginate impression material. Wrap the impression in wet gauze to prevent distortion.
  3. c) Prepare the tooth to be crowned.
  4. d) Cut V notches in the impression from gingival to buccal and lingual sides to allow escape of excess resin.
2. MIXING
  1. a) The standard powder/liquid ratio is 1.0 g/0.5 mL (up to the first graduation on the powder measure and the first graduation of the liquid pipette).
  2. Note: To minimize shrinkage use as little liquid as possible.
  3. b) Measure the liquid into the mixing jar, and slowly add the corresponding quantity of powder. Mix for 20-30 seconds.
3. APPLICATION
  1. a) Pour the creamy paste into the prepared impression, and seat tightly in the mouth.
  2. b) After 3 minutes in the mouth remove the impression, leaving the dough like resin on the tooth.
  3. c) Remove the resin crown before it is fully set and dip in and out of hot water (± 50°C) several times in order to prevent shrinkage.
  4. d) Trim any excess using a bur and then polish.
  5. e) Cement the temporary crown in position using GC FREEGENOL or other appropriate temporary cement.
B. BRIDGES
  • 1. PREPARATION
  1. a) Select a suitable artificial tooth and fix between the abutment teeth using a suitable wax. Check the bite.
  2. b) Take a full arch impression using an alginate impression material. Carefully remove the pontic and wrap the impression in wet gauze.
  3. c) Prepare the abutment teeth as appropriate. Subsequent procedures are carried out as described above for crowns A. 1 (a) to A. 3 (e).


Keywords
dental product online
dental products online
dental products online shopping
dental products online usa
dental products online store india
dental products online uae
dental products online uk
dental products online review
buy dental product online india
buy dental products online
dental care products online
3m dental products online
dental lab products online
cheap dental products online
dental health products online
sell dental products online
buy dental products online usa
order dental products online
dental care products online india
dental laboratory products online

Subscribe by Email

Follow Updates Articles from This Blog via Email

No Comments

Powered by Blogger.

INSTAGRAM FEED

@soratemplates