Gc Flexceed Putty And Kit
Description
Vinyl polysiloxane impression material
The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.
FLEXCEED, with its lowest contact angle, displaces moisture and lows into subgingival areas rather than lowing away to mucosal surfaces, thus producing accurate impression detail.
It has High Initial Hydrophilicity & Viscosity . It gets pushed into the sub-gingival area easily to register the details. The flow of FLEXCEED Putty-Wash is better than most of the brands.
FLEXCEED LIGHT BODY is more hydrophilic:
The initial contact angle of a water droplet on an impression material helps measures the ability of a material to wet surfaces
FLEXCEED exhibits the highest tear strength to give an accurate impression detail everytime.
The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.
The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.
INDICATIONS:
- For impressions in cases of veneers, inlay, onlay, crown or bridge
Features
- Better reproduction detail with two viscosities (Putty & Light Body)
- Exhibits pseudo-plastic properties for precision which is not found in alginates
- Superior tear strength than any other VPS material
- Better dimensional stability – multiple models can be poured up to two weeks
- Good hydrophilicity
- Compatible with gypsum products
- Superior wetting characteristics ensuring gypsum working cast is hard with smooth surface
- Can be subjected to cold sterilization without compromising the details and dimensional stability of the impression
Key Specifications
PHYSICAL PROPERTIES:
| LIGHT BODY | PUTTY | |
| Mixing Time | 20 sec | |
| Total Working Time | 2 min | 1 min |
| Minimum time in Mouth | 3 min | 3 min |
| Elastic recovery | More than equals 98% | More than equals 98% |
| Strain in Compression | 2.5-3.5 % | 1-2% |
| Linear dimensional change | Less than or equals to 0.20% | Less than or equals to 0.20% |
| Detail Reproduction | 20 μm | 75 μm |
| Compatibility with Gypsum | 20 μm | 75 μm |
Packaging
GC Flexceed Putty :
- 1 x (500g) 278ml Base
- 1 x (500g) 278ml Catalyst
GC Flexceed Putty + Light Body Kit:
- 1 x (500g) 278ml Base
- 1 x (500g) 278ml Catalyst
- 2 x 50ml Light Body
- 8 Mixing tips
GC Flexceed Light Body :
- 2 x 78gm Catridge
Subscribe by Email
Follow Updates Articles from This Blog via Email
No Comments